如何设置Linux下的NTP同步间隔？ (linux设置ntp同步间隔)

How to Set NTP Sync Interval on Linux

NTP (Network Time Protocol) is a protocol used to synchronize the clocks of computers in a network. It is an essential tool for any administrator who wants to ensure the systems in their network are up to date with the correct time. In this article, we will discuss how to set the NTP sync interval on Linux.

Step 1: Install NTP on your Linux machine

Before we can proceed with setting the NTP sync interval, we need to first install NTP on our Linux machine. This can be done by running the following command in the terminal:

sudo apt-get install ntp

This command will install the NTP package on your Linux machine. Once installed, we can proceed with setting the NTP sync interval.

Step 2: Determine the current NTP sync interval

To determine the current NTP sync interval on your Linux machine, you can run the following command in the terminal:

ntpq -pn

This command will display the list of NTP servers that your machine is synchronizing with along with the time offset from your machine’s clock. The “reach” column in the output displays the sync interval in seconds. The default NTP sync interval on Linux is 64 seconds. However, this can be changed by modifying the NTP configuration file.

Step 3: Modify the NTP configuration file to set the sync interval

To modify the NTP configuration file, navigate to the following location on your Linux machine:

/etc/ntp.conf

Open the file using your preferred text editor and look for the “minpoll” and “maxpoll” directives. These directives define the minimum and maximum poll intervals in seconds that the NTP client should use when communicating with the NTP servers.

The default values for these directives are “minpoll 6” and “maxpoll 10”. This means that the NTP client will poll the NTP servers every 64 to 1024 seconds (2^6 to 2^10) to synchronize the time.

To set a new sync interval, modify the values of the “minpoll” and “maxpoll” directives accordingly. For example, to set the sync interval to 30 seconds, you can modify the directives as follows:

minpoll 5

maxpoll 6

Save the file and restart the NTP service using the following command:

sudo systemctl restart ntp

Step 4: Verify the new NTP sync interval

To verify that the new NTP sync interval has been applied, you can run the “ntpq -pn” command agn. The output should display the new sync interval in the “reach” column.

Conclusion

In conclusion, setting the NTP sync interval on Linux is a strghtforward process that can be done by modifying the “minpoll” and “maxpoll” directives in the NTP configuration file. By changing the sync interval, you can ensure that your Linux machine’s clock is synchronized with the correct time at the desired frequency.

相关问题拓展阅读：

• ntp时间同步配置

ntp时间同步配置

vi /etc/ntp.conf 添加内网ntp服务器。

systemctl start ntpd 启动ntpd服务早轿

ntpstat 命令查看时间同步状态，这个一般需要5-10分钟后州睁铅才能成功连接和同步。所以，服务器启动后需要稍等下。

刚启动的时候，一般是：

连接并同步后

*表示目前使用的ntp server；

st：即stratum阶层，值越小表示ntp serve的精准度越高；

when：几秒前曾做过时间同步更新的操作；

Poll表示，每隔多少毫秒与ntp server同步一次；

reach：已经向上层NTP服务器要求更新的次数；

delay：网络传输过程钟延迟的时间；

offset：时册好间补偿的结果；

jitter：Linux系统时间与BIOS硬件时间的差异时间

关于linux设置ntp同步间隔的介绍到此就结束了，不知道你从中找到你需要的信息了吗 ？如果你还想了解更多这方面的信息，记得收藏关注本站。

香港服务器首选树叶云，2H2G首月10元开通。
树叶云（shuyeidc.com）提供简单好用，价格厚道的香港/美国云服务器和独立服务器。IDC+ISP+ICP资质。ARIN和APNIC会员。成熟技术团队15年行业经验。