设置 Konnectivity 服务
Konnectivity 服务为控制平面提供集群通信的 TCP 级别代理。
在开始之前
你需要有一个 Kubernetes 集群，并且 kubectl 命令可以与集群通信。 建议在至少有两个不充当控制平面主机的节点的集群上运行本教程。 如果你还没有集群，可以使用 minikube 创建一个集群。
配置 Konnectivity 服务
接下来的步骤需要出口配置，比如：
apiVersion: apiserver.k8s.io/v1beta1
kind: EgressSelectorConfiguration
egressSelections:
# Since we want to control the egress traffic to the cluster, we use the
# "cluster" as the name. Other supported values are "etcd", and "master".
- name: cluster
connection:
# This controls the protocol between the API Server and the Konnectivity
# server. Supported values are "GRPC" and "HTTPConnect". There is no
# end user visible difference between the two modes. You need to set the
# Konnectivity server to work in the same mode.
proxyProtocol: GRPC
transport:
# This controls what transport the API Server uses to communicate with the
# Konnectivity server. UDS is recommended if the Konnectivity server
# locates on the same machine as the API Server. You need to configure the
# Konnectivity server to listen on the same UDS socket.
# The other supported transport is "tcp". You will need to set up TLS
# config to secure the TCP transport.
uds:
udsName: /etc/kubernetes/konnectivity-server/konnectivity-server.socket
你需要配置 API 服务器来使用 Konnectivity 服务，并将网络流量定向到集群节点：
确保服务账号令牌卷投射 特性被启用。该特性自 Kubernetes v1.20 起默认已被启用。
- 创建一个出站流量配置文件，比如
admin/konnectivity/egress-selector-configuration.yaml。 - 将 API 服务器的
--egress-selector-config-file 参数设置为你的 API 服务器的 离站流量配置文件路径。 - 如果你在使用 UDS 连接，须将卷配置添加到 kube-apiserver：
spec:
containers:
volumeMounts:
- name: konnectivity-uds
mountPath: /etc/kubernetes/konnectivity-server
readOnly: false
volumes:
- name: konnectivity-uds
hostPath:
path: /etc/kubernetes/konnectivity-server
type: DirectoryOrCreate为 konnectivity-server 生成或者取得证书和 kubeconfig 文件。 例如，你可以使用 OpenSSL 命令行工具，基于存放在某控制面主机上 /etc/kubernetes/pki/ca.crt 文件中的集群 CA 证书来 发放一个 X.509 证书。
openssl req -subj "/CN=system:konnectivity-server" -new -newkey rsa:2048 -nodes -out konnectivity.csr -keyout konnectivity.key -out konnectivity.csr
openssl x509 -req -in konnectivity.csr -CA /etc/kubernetes/pki/ca.crt -CAkey /etc/kubernetes/pki/ca.key -CAcreateserial -out konnectivity.crt -days 375 -sha256
SERVER=$(kubectl config view -o jsonpath='{.clusters..server}')
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config set-credentials system:konnectivity-server --client-certificate konnectivity.crt --client-key konnectivity.key --embed-certs=true
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config set-cluster kubernetes --server "$SERVER" --certificate-authority /etc/kubernetes/pki/ca.crt --embed-certs=true
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config set-context system:konnectivity-server@kubernetes --cluster kubernetes --user system:konnectivity-server
kubectl --kubeconfig /etc/kubernetes/konnectivity-server.conf config use-context system:konnectivity-server@kubernetes
rm -f konnectivity.crt konnectivity.key konnectivity.csr接下来，你需要部署 Konnectivity 服务器和代理。 kubernetes-sigs/apiserver-network-proxy 是一个参考实现。
在控制面节点上部署 Konnectivity 服务。 下面提供的 konnectivity-server.yaml 配置清单假定在你的集群中 Kubernetes 组件都是部署为静态 Pod 的。 如果不是，你可以将 Konnectivity 服务部署为 DaemonSet。
apiVersion: v1
kind: Pod
metadata:
name: konnectivity-server
namespace: kube-system
spec:
priorityClassName: system-cluster-critical
hostNetwork: true
containers:
- name: konnectivity-server-container
image: us.gcr.io/k8s-artifacts-prod/kas-network-proxy/proxy-server:v0.0.16
command: ["/proxy-server"]
args: [
"--logtostderr=true",
# This needs to be consistent with the value set in egressSelectorConfiguration.
"--uds-name=/etc/kubernetes/konnectivity-server/konnectivity-server.socket",
# The following two lines assume the Konnectivity server is
# deployed on the same machine as the apiserver, and the certs and
# key of the API Server are at the specified location.
"--cluster-cert=/etc/kubernetes/pki/apiserver.crt",
"--cluster-key=/etc/kubernetes/pki/apiserver.key",
# This needs to be consistent with the value set in egressSelectorConfiguration.
"--mode=grpc",
"--server-port=0",
"--agent-port=8132",
"--admin-port=8133",
"--health-port=8134",
"--agent-namespace=kube-system",
"--agent-service-account=konnectivity-agent",
"--kubeconfig=/etc/kubernetes/konnectivity-server.conf",
"--authentication-audience=system:konnectivity-server"
]
livenessProbe:
httpGet:
scheme: HTTP
host: 127.0.0.1
port: 8134
path: /healthz
initialDelaySeconds: 30
timeoutSeconds: 60
ports:
- name: agentport
containerPort: 8132
hostPort: 8132
- name: adminport
containerPort: 8133
hostPort: 8133
- name: healthport
containerPort: 8134
hostPort: 8134
volumeMounts:
- name: k8s-certs
mountPath: /etc/kubernetes/pki
readOnly: true
- name: kubeconfig
mountPath: /etc/kubernetes/konnectivity-server.conf
readOnly: true
- name: konnectivity-uds
mountPath: /etc/kubernetes/konnectivity-server
readOnly: false
volumes:
- name: k8s-certs
hostPath:
path: /etc/kubernetes/pki
- name: kubeconfig
hostPath:
path: /etc/kubernetes/konnectivity-server.conf
type: FileOrCreate
- name: konnectivity-uds
hostPath:
path: /etc/kubernetes/konnectivity-server
type: DirectoryOrCreate
在你的集群中部署 Konnectivity 代理：
apiVersion: apps/v1
# Alternatively, you can deploy the agents as Deployments. It is not necessary
# to have an agent on each node.
kind: DaemonSet
metadata:
labels:
addonmanager.kubernetes.io/mode: Reconcile
k8s-app: konnectivity-agent
namespace: kube-system
name: konnectivity-agent
spec:
selector:
matchLabels:
k8s-app: konnectivity-agent
template:
metadata:
labels:
k8s-app: konnectivity-agent
spec:
priorityClassName: system-cluster-critical
tolerations:
- key: "CriticalAddonsOnly"
operator: "Exists"
containers:
- image: us.gcr.io/k8s-artifacts-prod/kas-network-proxy/proxy-agent:v0.0.16
name: konnectivity-agent
command: ["/proxy-agent"]
args: [
"--logtostderr=true",
"--ca-cert=/var/run/secrets/kubernetes.io/serviceaccount/ca.crt",
# Since the konnectivity server runs with hostNetwork=true,
# this is the IP address of the master machine.
"--proxy-server-host=35.225.206.7",
"--proxy-server-port=8132",
"--admin-server-port=8133",
"--health-server-port=8134",
"--service-account-token-path=/var/run/secrets/tokens/konnectivity-agent-token"
]
volumeMounts:
- mountPath: /var/run/secrets/tokens
name: konnectivity-agent-token
livenessProbe:
httpGet:
port: 8134
path: /healthz
initialDelaySeconds: 15
timeoutSeconds: 15
serviceAccountName: konnectivity-agent
volumes:
- name: konnectivity-agent-token
projected:
sources:
- serviceAccountToken:
path: konnectivity-agent-token
audience: system:konnectivity-server
最后，如果你的集群启用了 RBAC，请创建相关的 RBAC 规则：
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
name: system:konnectivity-server
labels:
kubernetes.io/cluster-service: "true"
addonmanager.kubernetes.io/mode: Reconcile
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: system:auth-delegator
subjects:
- apiGroup: rbac.authorization.k8s.io
kind: User
name: system:konnectivity-server
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: konnectivity-agent
namespace: kube-system
labels:
kubernetes.io/cluster-service: "true"
addonmanager.kubernetes.io/mode: Reconcile
文章来源网络，作者：运维，如若转载，请注明出处：https://shuyeidc.com/wp/205847.html<
