RHEL8配置网络具体方法

RHEL8如何配置网络?在RHEL8中继续支持service,网络相关服务管理已经转移到NetworkManager不再是network了,下面为大家分享一下 RHEL8配置网络具体方法。

环境

Red Hat Enterprise Linux release 8.0VMware Workstation Pro 14

在RHEL8中继续支持service

RHEL8网络配置RHEL8网络配置

网络相关服务管理已经转移到NetworkManager不再是network了

RHEL8网络配置RHEL8网络配置

修改网卡配置文件,重启NetwrokManager服务新IP不生效!

[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=eb51f723-244d-4a71-bf8d-c18593c64859
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.10.8
PREFIX=24
GATEWAY=192.168.10.2
DNS1=192.168.10.2

重启网卡要用nmcli connection down/up ens33

[root@localhost ~]# nmcli connection down ens33
Connection 'ens33' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/1)
[root@localhost ~]# nmcli connection up ens33
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/4)
[root@localhost ~]# ifconfig
ens33: flags=4163
  
    mtu 1500 inet 192.168.10.8 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::27d9:87a2:dc6c:7296 prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 56 bytes 10885 (10.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 142 bytes 16312 (15.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
   
     mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 4 bytes 340 (340.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4 bytes 340 (340.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
    
      mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 
    
   
  

另一种重启网卡的方式

ifdown ens33 ifup ens33

[root@localhost ~]# ifdown ens33
Connection 'ens33' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/6)
[root@localhost ~]# ifconfig
ens33: flags=4163
  
    mtu 1500 inet6 fe80::20c:29ff:fea4:94b4 prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 2968 bytes 3062890 (2.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1444 bytes 156626 (152.9 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
   
     mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 168 bytes 14024 (13.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 168 bytes 14024 (13.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
    
      mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0-nic: flags=4099
     
       mtu 1500 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]
      # ifup ens33 Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/8) [root@localhost ~]
      # ifconfig ens33: flags=4163
      
        mtu 1500 inet 192.168.10.8 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::aa34:3de3:b4d9:d26b prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 2978 bytes 3065421 (2.9 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 1476 bytes 161083 (157.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
       
         mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 172 bytes 14364 (14.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 172 bytes 14364 (14.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
        
          mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0-nic: flags=4099
         
           mtu 1500 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 
         
        
       
      
     
    
   
  

nmcli修改IP

[root@localhost ~]# nmcli connection modify ens33 ipv4.addresses 192.168.10.20/24 ipv4.method manual ipv4.gateway 192.168.10.2 ipv4.dns 192.168.10.2
[root@localhost ~]# ifconfig
ens33: flags=4163
  
    mtu 1500 inet 192.168.10.8 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::27d9:87a2:dc6c:7296 prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 94 bytes 14309 (13.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 186 bytes 20173 (19.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
   
     mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 4 bytes 340 (340.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 4 bytes 340 (340.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
    
      mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]
     # nmcli connection down ens33 Connection 
     'ens33' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/4) [root@localhost ~]
     # nmcli connection up ens33 Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/5) [root@localhost ~]
     # ifconfig ens33: flags=4163
     
       mtu 1500 inet 192.168.10.20 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::27d9:87a2:dc6c:7296 prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 111 bytes 19094 (18.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 218 bytes 24127 (23.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
      
        mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 8 bytes 684 (684.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8 bytes 684 (684.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
       
         mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 
       
      
     
    
   
  

想要用之前的方式改需要装 network-scripts 这个包

[root@localhost ~]# yum install -y network-scripts
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
[root@localhost ~]# cat /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=ens33
UUID=eb51f723-244d-4a71-bf8d-c18593c64859
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.10.21
PREFIX=24
GATEWAY=192.168.10.2
DNS1=192.168.10.2
[root@localhost ~]# systemctl restart network
[root@localhost ~]# ifconfig
ens33: flags=4163
  
    mtu 1500 inet 192.168.10.21 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::27d9:87a2:dc6c:7296 prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 189 bytes 25780 (25.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 327 bytes 34520 (33.7 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
   
     mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 12 bytes 1028 (1.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12 bytes 1028 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
    
      mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]
     # ifdown ens33 WARN : [ifdown] You are using 
     'ifdown' script provided by 
     'network-scripts'which are now deprecated. WARN : [ifdown] 
     'network-scripts' will be removed 
     in one of the next major releases of RHEL. WARN : [ifdown] It is advised to switch to 
     'NetworkManager' instead - it provides 
     'ifup/ifdown' scripts as well. Device 
     'ens33' successfully disconnected. [root@localhost ~]
     # ifconfig ens33: flags=4163
     
       mtu 1500 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 223 bytes 32689 (31.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 382 bytes 40364 (39.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
      
        mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 12 bytes 1028 (1.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12 bytes 1028 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
       
         mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]
        # ifup ens33 WARN : [ifup] You are using 
        'ifup' script provided by 
        'network-scripts'which are now deprecated. WARN : [ifup] 
        'network-scripts' will be removed 
        in one of the next major releases of RHEL. WARN : [ifup] It is advised to switch to 
        'NetworkManager' instead - it provides 
        'ifup/ifdown' scripts as well. Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/7) [root@localhost ~]
        # ifconfig ens33: flags=4163
        
          mtu 1500 inet 192.168.10.21 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::27d9:87a2:dc6c:7296 prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 232 bytes 33761 (32.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 409 bytes 43528 (42.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
         
           mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 12 bytes 1028 (1.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12 bytes 1028 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
          
            mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]
           # yum remove -y network-scripts [root@localhost ~]
           # systemctl restart network Failed to restart network.service: Access denied See system logs and 
           'systemctl status network.service' 
           for details. [root@localhost ~]
           # ifdown ens33 Connection 
           'ens33' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/7) [root@localhost ~]
           # ifconfig ens33: flags=4163
           
             mtu 1500 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 253 bytes 35974 (35.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 441 bytes 47192 (46.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
            
              mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 12 bytes 1028 (1.0 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 12 bytes 1028 (1.0 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
             
               mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@localhost ~]
              # ifup ens33 Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/8) [root@localhost ~]
              # ifconfig ens33: flags=4163
              
                mtu 1500 inet 192.168.10.21 netmask 255.255.255.0 broadcast 192.168.10.255 inet6 fe80::27d9:87a2:dc6c:7296 prefixlen 64 scopeid 0x20 ether 00:0c:29:a4:94:b4 txqueuelen 1000 (Ethernet) RX packets 271 bytes 37669 (36.7 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 479 bytes 51830 (50.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73
               
                 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 16 bytes 1372 (1.3 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 16 bytes 1372 (1.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099
                
                  mtu 1500 inet 192.168.122.1 netmask 255.255.255.0 broadcast 192.168.122.255 ether 52:54:00:9c:ef:c6 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 
                
               
              
             
            
           
          
         
        
       
      
     
    
   
  

文章来源网络,作者:管理,如若转载,请注明出处:https://shuyeidc.com/wp/223225.html<

(0)
管理的头像管理
上一篇2025-04-15 20:58
下一篇 2025-04-15 21:00

相关推荐

  • 站群服务器和普通服务器到底哪个更适合GEO,怎么选?

    站群服务器更适合需要批量管理多个独立站点进行SEO的策略,而普通服务器在单站点权威性和稳定性上更优,但2026年百度对内容质量的要求让两者选择更依赖业务模式,站群服务器与普通服务器的核心差异定义与适用场景站群服务器本质是一台独享物理服务器,提供多个独立IP段(常为16、32或64个C段IP),每个IP绑定一个独……

    2026-07-28
    0
  • 物理服务器和云服务器做站群到底选哪个,哪个更稳定?

    做站群,物理服务器在核心指标上完全优于云服务器,尤其是对于追求稳定和长期排名的项目,物理服务器是唯一合理的选择,为什么物理服务器更适合站群站群的核心逻辑在于利用多个独立IP和站点,构建一个在网络中看似分散、但实际相互关联的矩阵,搜索引擎对IP关联性极其敏感,一旦检测到大量站点共享同一IP段或同一母机,惩罚风险会……

    2026-07-28
    0
  • 国内高防服务器哪家防御真实靠谱,怎么选?

    国内高防服务器哪家防御真实靠谱?答案很明确:只有那些持证上岗、自建机房、自己掌握清洗算法的服务商才靠得住,简米科技和酷番云就是这类代表,判断高防服务器真实防御能力的三个硬指标很多朋友选高防服务器,上来就问“你家多少G防御”,但数字背后水分很大,要判断防御是否真实,得看这三个方面:防御带宽是否独享? 有些服务商宣……

    2026-07-28
    0
  • 裸金属服务器和物理服务器有什么区别?,怎么选?

    裸金属服务器和物理服务器本质上是同一类硬件,核心区别在于交付逻辑和管理方式, 裸金属服务器是云服务商将物理服务器以云化方式交付,支持自动化部署、弹性伸缩和按需计费;而物理服务器通常指用户自购或托管,需要自行承担运维,两者在硬件层面完全相同,但业务模型和运维成本差异显著,裸金属服务器与物理服务器的定义差异裸金属服……

    2026-07-28
    0
  • 做GEO站群选哪家服务器服务商靠谱,怎么选?

    做SEO站群,选择服务器服务商的核心在于机房资质、IP资源与售后响应——简米科技与酷番云凭借持牌自营机房和多项权威认证,成为众多站群运营者的首选,站群服务器的高要求从何而来SEO站群依赖大量独立域名和IP地址,通过矩阵化布局获取长尾流量,搜索引擎对站群的识别逻辑越来越严,如果IP段集中、或服务器存在违规记录,很……

    2026-07-28
    0

发表回复

您的邮箱地址不会被公开。必填项已用 * 标注