后浪云Minecraft Wiki教程：Structure[ ]

This page describes content that exists only in outdated versions of Minecraft.  These features exist only in outdated versions of
Minecraft. See Tutorials/Elevators#Water elevators for modern-day water elevators.

Water ladders were structures to facilitate quick climbing in a strictly vertical manner. The accessible portion of this structure was a 1×1 shaft, but if created above ground would require 3×3 blocks of horizontal space.

Contents

• 1Structure
• 2Ladders vs. signs
• 3Notes
• 4Hidden water ladder
• 5Gallery
• 6Videos
• 7References

Structure[]

The ladder is essentially two shafts separated by a wall. At the top of the second shaft, a water source block is placed. The ladders are placed every other block. However the placement here is important; the first ladder must be placed in front of the hole leading to the water source block.

For every two blocks dug down, dig two blocks over and then one up to connect the water shaft. Place ladders in front of all of these openings to stop the water from flowing out into the ladder shaft.

As of Beta 1.5, you are now required to look at the corner between the water and the ladders to even go up the water ladder, and the bottom of the ladder now requires three consecutive ladders without a gap. Going up a water ladder is slightly slower than before, but it’s still significantly faster than regular ladders.

Ladders vs. signs[]

It has been noted that this can be achieved by placing signs in front of the water outlets as well, but if the water is ever stopped, you can’t climb signs back out.

Another reason to use ladders rather than signs is resource efficiency. It costs 7 sticks to make three ladders, or 1.17 planks for one, while a sign is comprised of 2.16 planks. Ladders also stack in larger bunches in your inventory, so you can carry more of them, or have more room for other gear (64 of ladders versus 16 of signs).

However, transport down is faster when using signs, one can simply fall down the shaft and then land on a pool at the bottom. When using ladders, you’ll have to climb down.

Notes[]

• Due to the south-west rule, only water ladders facing south or west (user facing the water) will work.
• As of Beta 1.4, only ascending a water ladder from a standstill on the ground will work.
• Facing one of the corners of the water ladder also seems to allow it to function.
• As of Beta 1.5, water ladders are still climbable, but require careful positioning to allow faster-than-normal vertical motion.
• As of Beta 1.5, Minecraft will sometimes recognize the player as “in” the water causing an annoying delay to climbing ladders.
• As of Beta 1.6, water ladders are harder to build, slower and more difficult to use, but still allow faster vertical motion than ladders.^[1]

Hidden water ladder[]

It was possible to make a hidden water ladder, but this was also affected by the Beta 1.6 bug-fix. To construct one, build your water shaft normally except put dirt or cobblestone where you would normally put the ladder. Then, move one space sideways, and dig a shaft upwards there. Face the corner where the water is and press up. Voila! Now hide your water source blocks and you’re done. Using his method you can remove the usage of signs or ladders, but also makes it difficult (not impossible) to go downwards without damaging yourself, so this type is ideal for one-way up shafts. The other downside is that it only works when it is facing southwest (user facing the ladder).

Gallery[]

Videos[]

There are a couple videos featuring the speed of a water ladder and also the creation of one.

References[]

1. ↑http://www.minecraftforum.net/topic/360549-working-water-ladder-in-beta-166/